S600Ex-UV Ultraviolet Flame Detector (Single UV, Explosion-proof)

S600Ex-UV Ultraviolet Flame Detector (Single UV, Explosion-proof)

Detect UV-emitting flames where a clear indoor sightline is available.

  • Match the flame type

    UV sensing suits specified flames in the detector's field of view.

  • Connect the alarm

    Relay and RS-485 outputs support site alarm integration.

  • Avoid unsuitable surroundings

    Review welding, other UV sources, dust and steam before installation.

The manufacturer excludes outdoor use and locations near arc welding or UV lighting for this model.

Overview

The S600Ex-UV point-type ultraviolet flame detector employs a high-sensitivity imported UV sensor, which reacts to ultraviolet radiation the instant a fire or explosive ignites. Combining the analysis of flame characteristics during a fire with logical judgment, it exhibits high immunity to false alarms caused by ambient light sources. The detector is suitable for smokeless liquid, gas, and solid fires, as well as other locations where deflagration may occur.

The detector is particularly suitable for fires involving metals such as sodium and magnesium; explosives; and gases such as hydrogen, hydrides, ammonia, and silanes. Use in environments with water vapor or dust accumulation will reduce the detector's sensitivity.

The detector is not suitable for use in environments with arc welding, ultraviolet light exposure, or outdoors.

Key Features

UV Flame Detection & Coverage

  • Imported High-Sensitivity UV Sensor
  • Detects Hydrogen, Metal, Ammonia & Silane Fires
  • Instant UV Response at Ignition
  • Flame Characteristic Logic, Fewer False Alarms
  • 6-Second Fast Response

Relay & RS485 Outputs

  • Relay + RS485 Output with DIP Address Setting

Installation & Protection

  • Ex d II CT6 Explosion-Proof
  • IP66 Dustproof & Waterproof

Technical Specifications

Spectral response range  185~260 nm
Response time  6 s
Viewing angle  ≤ 110°
Detection range  Class I
Operating temperature  -10 ~ 55 ℃
Operating humidity  ≤ 95% RH
Operating pressure  86 ~ 106 kPa
Working voltage  DC 24 V
Working current  Standby current ≤ 25 mA; Alarm current ≤ 35 mA
Compliance standard  GB12791-2006
Explosion-proof grade  Ex d II CT6
Ingress protection  IP66

 

Signal Output
Switch quantity relay contact output & RS485. Built-in DIP switch for detector address setting.
Mechanical Structure
Installation  Wall mounting / Ceiling mounting
Cable entry thread  20mm×1.5mm, convertible to G1/2 (optional)
Dimension  190 × 160 × 110 mm
Housing material  Die-cast aluminum
Weight  1 kg
Advantages Dustproof, explosion-proof and corrosion-resistant.

Request a Quote

Tell us the fuel, indoor sightline, nearby UV sources, alarm interface and quantity.

    User Type:

    Country: