Screen breath alcohol without a mouthpiece during high-throughput checks.
Pump-assisted sampling and one-hand operation support rapid screening.
The fuel-cell sensor and on-device indication help operators review each check.
Light, sound and vibration give staff several alarm signals.
For screening use. Confirm the required test procedure and calibration schedule for your site.
The ZM-2100 portable alcohol detector is a multifunctional device that combines alcohol detection with a baton-type instrument, primarily designed for rapid alcohol testing.
This detector employs a pump-assisted detection method, ensuring faster and more accurate results. It utilizes an electrochemical fuel cell-based alcohol sensor, which offers exceptional sensitivity and excellent repeatability.
The device features embedded microcomputer control for user-friendly operation, while its housing is constructed from high-strength engineering plastic, providing robust durability and a comfortable handle.
The design, manufacturing, and testing of this product comply with the following national standards: GB 19522-2010 "Threshold Values and Testing Methods for Blood and Breath Alcohol Content in Vehicle Drivers" GB/T 21254-2017 "Exhaled Gas Alcohol Content Analyzer"
| Detection method | Pump suction type |
| Sensor type | Electrochemical fuel cell-based alcohol sensor |
| Detected gas | Alcohol |
| Blow distance | ≤5 cm |
| Detection time | adjustable from 3 to 15 seconds |
| Working environment | Temperature -5℃ ~ 45℃; Humidity 20% ~ 98% RH |
| Response time | ≤2 seconds |
| Reading error | ≤±5 mg/100 mL |
| Indication method | LED, audible alarm, vibration alarm |
| Conductor mode | Indicator light always on / flashing |
| Operating voltage | DC 3.7V lithium battery, 2000 mAh |
| Power-saving mode | Automatically shuts down after 3 minutes under standby without operation |
| Charging time | ≤6 hours |
| Standby time | No less than 8 hours under non-alarm state |
| Sensor lifespan | 2 years (electrochemical sensor) |
| External dimensions | 383mm × 66mm × 47mm (length × width × height) |
| Weight | Approximately 300 g |
| Shell material | Engineering plastic |
Tell us your screening workflow, expected daily test volume, country of use and quantity. We can confirm the suitable configuration and calibration support.
